Economizer
Water / Gas
The aim of water/gas economizers is to use the residual heat from the combustion gases to preheat the feedwater to the boiler.
More about Economizers 
Water/Gas Economizers.
Economizer
Water / Gas
The aim of water/gas economizers is to use the residual heat from the combustion gases to preheat the feedwater to the boiler.
Water/Gas Economizers.
More about Economizers
We gain two advantages from the use of this energy-saving system. First, we reduce the amount of energy required to reach steam production, and second, we achieve partial deaeration of the feedwater, so increasing the durability of the boiler. Alongside the economizer, a continuous and modulated water feeding system is installed.
The advantages of installing our Water/Gas Economizer systems are:
- Improved boiler performance
- Reduction in fuel consumption
- Re-usage of residual heat in combustion gases at all times for water recirculation (3rd pass).
- Reduction of gas pollutants
- Reduction of running costs
- Extended useful life of the boiler
Preheater
Gas / Air
The aim of this system is to use the residual heat from the combustion gases to preheat the air needed for combustion. This reduces the energy required to achieve the desired temperature. This in turn increases the efficiency of steam generation, as less fuel is used to obtain the same level of steam production.
Advantages Preheaters
FIEL Boiler with Air/Gas Preheater.
Preheater
Gas / Air
The aim of this system is to use the residual heat from the combustion gases to preheat the air needed for combustion. This reduces the energy required to achieve the desired temperature. This in turn increases the efficiency of steam generation, as less fuel is used to obtain the same level of steam production.
FIEL Boiler with Air/Gas Preheater.
Advantages of Gas/Air preheaters:
- Increased energy efficiency.
- Reduction in fuel consumption.
- Improved heat transfer.
- Reduced emission of harmful gases
- Lower operating costs.
- Longer lifespan of the boiler.
Thermocompressors
RCB specialize in the manufacturing of Thermocompressors for maximum energy efficiency in water and steam installations.
The energy-saving system is based on using the residual heat from condensate flow which returns from the production process. With this equipment, steam condensate is returned at low pressure so that it can be reused in other industrial processes.
More about Thermocompressors
RCB Thermocompressor.
Thermocompressors
RCB specialize in the manufacturing of Thermocompressors for maximum energy efficiency in water and steam installations.
The energy-saving system is based on using the residual heat from condensate flow which returns from the production process. With this equipment, steam condensate is returned at low pressure so that it can be reused in other industrial processes.
RCB Thermocompressor.
More about Thermocompressors
Advantages of Thermocompressors:
- Increased performance of the steam unit.
- Reduced energy loss.
- Increased machine performance.
- Systems compatible with any type of steam installation.
- Both the recirculation and recompression systems are compatible and allow for complete energy use.
- Applicable with other compatible gases compatible with its construction.
Types of installations with steam Thermocompressors:
• RECIRCULATION: when the objective is to improve system performance, and therefore production of our equipment, or its efficiency. This setup can generate a performance improvement up to approximately 15%, and a steam saving of up to 5%.
• RECOMPRESSION: installations with steam thermocompressors incorporated are exclusively aimed at saving systems, where 30% or more steam can be directly saved.
Both types of installation can be combined for full energy use.